Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW - Manual (Page 4)

Upgrading your 1394 GMC Turbo Firmware 4
Publication 1394–6.3 – November 1997
3. Select Accessories. The Accessories menu appears.
4. Select HyperTerminal. The HyperTerminal directory window
appears.
5. Select Hypertrm.exe. The Connection Description window
appears.
6. Type the name of your connection in the Name field.
7. Select an Icon to represent the name of your connection.
8. Select OK. The Phone Number window appears.
9. In the Connect using field, select an available COM port. This is
the COM port (9-pin serial port) you will use to connect your PC
to the 1394 GMC Turbo. In the example below, we use COM1.
Important: The number of the COM port depends on your
computer hardware setup.
10.Select OK. The COMx Properties window appears.