Rockwell Automation 1405-M620 Operating Instructions - Manual (Page 15)

E
P
cos ϕ
A
V
+ F
E
P
cos ϕ
A
V
+ F
Begin settings
Indicates software version
Select nominal voltage
Publication 1405-IN002C-EN-P - November 2004
Bulletin 1405 (M620) Operating Instructions 15
Repeatedly pressing the “F” key causes the prompts for the other
parameters to be displayed in succession. If the settings are to be
selected from a limited number of fixed values (e.g. the initial values
of the energy counters, or the analog retransmission output ranges)
only index characters are displayed.