Display functions – Rockwell Automation 1405-M620 Operating Instructions User Manual
Page 17
E
P
cos
ϕ
A
V
+
F
E
P
cos
ϕ
A
V
+
F
Address: 1 to 257
Baud Rate: 9.6 or 19.2
kbaud
Publication 1405-IN002C-EN-P - November 2004
Bulletin 1405 (M620) Operating Instructions 17
The changed setting values are stored only when a password code is
entered. The default password code is “3136”. After all the setting
parameters are stepped through, the prompt “PASS” is displayed. If no
password code or a wrong password code is entered, the instrument
will exit the setting mode without storing any changes to the previous
settings.
E
P
cos
ϕ
A
V
+
F
E
P
cos
ϕ
A
V
+
F
E
P
cos
ϕ
A
V
+
F
Enable storage of changed settings
Enter the password code
Store the changed settings
Settings done
Display Functions
The following display related functions are described below.
•
Version indication
•
Under- and overvoltage alarm indication
•
Enabling / disabling the auto-sequencing display mode
•
and re-setting peak values
•
Re-set energy counters
Version indication: The software version of the instrument is
indicated by this display, which determines the features and functions