Rockwell Automation 1734-OB2EP Point I/O Protected Output Module Installation Instructions - Manual (Page 14)

14 POINT I/O Protected Output Module
Publication 1734-IN586A-EN-P - December 2001
Specifications - 1734-OB2EP Protected Output Module
Output Specifications - Meets IEC 1+ 24V dc Output Specifications
Number of Outputs 2 (1 group of 2) non-isolated, sourcing
ON-State Voltage Range 10V dc minimum
24V dc nominal
28.8V dc maximum
ON-State Voltage Drop 0.7V dc maximum (at 30V dc, 55°, full load
condition)
ON-State Current 1.0mA minimum per channel
OFF-State Voltage 28.8V dc maximum
OFF-State Leakage 0.5mA maximum
Output Signal Delay 1
OFF to ON
ON to OFF 0.1ms maximum
0.1ms maximum
Output Current Rating Maximum 2.0A per output
4.0A maximum per module
Surge Current 2A maximum, electronically protected
Indicators (field side indication,
logic driven) 2 yellow output status;
2 red output fault
2 green/red module/network status
Keyswitch Position 1
General Specifications
Module Location 1734-TB or -TBS wiring base assembly
Pointbus Current 75mA maximum @ 5V dc
Power Dissipation 3.4W maximum @ 28.8V dc
Thermal Dissipation 11.6 BTU/hr maximum @ 28.8V dc
Isolation Voltage 50V continuous (Tested to 1250V ac for 60s
between outputs and Pointbus)
External dc Power
Supply Voltage
Voltage Range
Supply Current 24V dc nominal
10 to 28.8V dc
8mA
Dimensions Inches
(Millimeters)
2.21H x 0.47W x 2.97L
(56.0H x 12.0W x 75.5L)