Configure your device parameters – Rockwell Automation 1792-OB4E INSTL.INST ARMORBLOCK 4 OUTPUT User Manual
Page 13
Advertising
13
ArmorBlock 4 Output Module
Publication 1792-5.4 – October 1996
Configure your Device Parameters
After adding the devices to the network, you must configure them. You
have 2 choices:
•
highlight the device, and click on the
button, or
•
double-click on the device to bring up the device configuration
screen.
The software displays
the parameter status.
For detailed device information on this device, click on
.
Advertising