Rockwell Automation 1792-OB4E INSTL.INST ARMORBLOCK 4 OUTPUT User Manual
Page 27
Advertising
27
ArmorBlock 4 Output Module
Publication 1792-5.4 – October 1996
The device configuration screen appears. Select the Reset Faulted I/O
parameter.
After selecting
the parameter, click on the
modify parameter button.
The configuration screen for the selected parameter appears.
1. Click on the faulted
output to reset.
2. Then click on the
OK button to apply.
3. You will be returned to
the configuration screen.
Click on ”Save to Device”
to apply the change.
Advertising