Rockwell Automation 1734-IA2_IA4, Series C POINT I/O 120V AC Input Module Installation Instructions - Manual (Page 10)

10 POINT I/O 120V AC Input Module
Publication 1734-IN010D-EN-E - March 2013
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base clockwise
until the number required for the type of module being installed aligns with the
notch in the base.
2. Make certain the DIN rail locking screw is in the horizontal position. You cannot
insert the module if the locking mechanism is unlocked.
3. Insert the module straight down into the mounting base and press to secure. The
module locks into place.
Turn the keyswitch to align the
number with the notch.
Notch position 1 is shown here.
Make sure the DIN-rail locking
screw is in the horizontal position.
1734-TOP base
45697