Rockwell Automation 1734-IA2_IA4, Series C POINT I/O 120V AC Input Module Installation Instructions - Manual (Page 6)

6 POINT I/O 120V AC Input Module
Publication 1734-IN010D-EN-E - March 2013
Before You Begin
You can use these POINT I/O™ 120V AC Input modules with DeviceNet and
PROFIBUS adapters. If you are using RSLogix 5000 software, version 11 or higher, you
can also use the Series C modules with ControlNet and Ethernet adapters.
Use this diagram to identify the external features of the module.
Note: The wiring base assembly consists of one of the following:
• 1734-TB or 1734-TBS POINT I/O two-piece terminal base, which includes the
1734-RTB Removable Terminal Block
• 1734-TOP or 1734-TOPS POINT I/O single-piece terminal base
POINT I/O 120V AC Input Module
Description Description
1 Module locking mechanism 6 Mounting base – 1734-TB, 1734-TBS
2 Slide-in writable label 7 Interlocking side pieces
3 Insertable I/O module 8 Mechanical keying (orange)
4 Removable Terminal Block (RTB) handle 9 DIN rail locking screw (orange)
5 RTB with screw or spring clamp 10 Module wiring diagram
120VAC Input
Module Status Network Status NODE:
0
1
1
10
9
8
7
2
3
4
5
6
45713