Rockwell Automation 1734-IA2_IA4, Series C POINT I/O 120V AC Input Module Installation Instructions - Manual (Page 19)

POINT I/O 120V AC Input Module 19
Publication 1734-IN010D-EN-E - March 2013
Specifications
POINT I/O 120V AC Input Module – 1734-IA2, 1734-IA4, Series C
Attribute Value
Number of inputs 1734-IA2 – 2 (1 group of 2) nonisolated, sinking
1734-IA4 – 2 (1 group of 4) nonisolated, sinking
On-state voltage range, min 65V AC
On-state voltage range, nom 120V AC
On-state voltage range, max 132V AC
On-state current, min 4.0 mA @ 65V AC, 60 Hz
On-state current, nom 7.5 mA @ 120V AC, 60 Hz
On-state current, max 8.5 mA @ 132V AC, 60 Hz
Off-state voltage, max 43V AC
Off-state current, max 2.7 mA @ 43V AC
Input impedance, nom 10.6 k Ω
General Specifications
Attribute Value
Terminal base screw torque 0.8 Nm (7 lb-in.)
Module location 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS wiring base assembly
POINTBus current, max 75 mA @ 5V DC
Power dissipation 0.1 W @ 132V AC
Thermal dissipation 3.4 BTU @ 132V AC
Isolation voltage 240V (continuous), Reinforced Insulation Type
Type tested @ 3250V DC for 60 s, field-side to system
External AC power supply
voltage, nom 120V AC @ 60 Hz
External AC power supply
voltage range 85...132V DC, 47...63 Hz
Dimensions, approx., HxWxD 56.0 x 12.0 x 75.5 mm
(2.21 x 0.47 x 2.97 in.)
Wiring category (1) 1 – on signal ports
Wire size Determined by installed terminal block
Weight, approx. 30.9 g (1.09 oz)