Rockwell Automation 1756-DNB ControlLogix DeviceNet Scanner Module Installation Instructions - Manual (Page 24)

24 ControlLogix DeviceNet Scanner Module
Publication 1756-IN566D-EN-P - June 2008
Check Power Supply and Module Status
Check the status indicators and alphanumeric display to determine if the
power supply and module are operating properly. See see Monitor and
Troubleshoot Devices in the Module Scan List on
page 27 .
When you apply chassis power, the alphanumeric display cycles through the
following information:
For more information on the alphanumeric display or status codes, see
Monitor and Troubleshoot Devices in the Module Scan List on
page 27 .
Power Supply indicator is green.
OK indicator is red
during self-test,
then green.
Alphanumeric
Display I/O
MOD/NET
DeviceNet
TM
MOD/NET I/O OK
1. TEST
2. PASS
3. Firmware revision (Rev xx.xxx)
4. Node address (A#xx)
Alphanumeric
Display