Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual

Publication 1734-IN002C-EN-E - April 2005
Installation Instructions
POINT I/O 2 Current Output and 2 Voltage
Output Analog Modules
Catalog Numbers 1734-OE2C and 1734-OE2V, Series C
Inside…
For This Topic See Page
Important User Information 2
Preventing Electrostatic Discharge 3
Environment and Enclosure 4
Before You Begin 5
Identify Module Components 5
Install the Mounting Base 6
Install the Module 7
Install the Removable Terminal Block (RTB) 8
Remove a Mounting Base 9
Communicate with Your Module 11
Wire the Module 12
Troubleshoot with Indicators 15
North American Hazardous Location Approval 18
European Hazardous Location Approval 19
Specifications 20