Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual (Page 12)

12 POINT I/O 2 Current Output and 2 Voltage Output Analog Modules
Publication 1734-IN002C-EN-E - April 2005
Wire the Module
WARNING
If you connect or disconnect wiring while the
field-side power is on, an electrical arc can occur.
This could cause an explosion in hazardous
location installations. Be sure that power is
removed or the area is nonhazardous before
proceeding.
1734
OE2C
NODE:
0
1
43962
1734-OE2C POINT I/O 2 Current Output Analog Module
Module Status
Network Status
Status of Output 0
Status of Output 1
Output 0 Connection 0 1 Output 1 Connection
5 C Chas Gnd = Chassis Ground
C = Common
V = Supply
3 Chas Gnd Chas Gnd 2
C 4
V 6
7 V
Module
Status
Network
Status
4-20 mA
Analog
Output