Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules - Manual (Page 17)

POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 17
Publication 1734-IN002C-EN-E - April 2005
Indication Probable Cause
1734-OE2C Probable Cause
1734-OE2V
Channel Status
Off Module is in CAL mode.
Green Normal operation is present with channel actively controlling
outputs.
Flashing Green Channel is being calibrated.
Flashing Red Open wire or no field power is
present. A low or high clamp is present.
Red - No field power is present.