Before you begin, Identify module components – Rockwell Automation 1734-OE2V/C Point I/O 2-Current and 2-Voltage Output Analog Modules User Manual
Page 5
POINT I/O 2 Current Output and 2 Voltage Output Analog Modules 5
Publication
1734-IN002C-EN-E - April 2005
Before You Begin
You can use these Series C modules with DeviceNet and PROFIBUS
adapters. If you are using RSLogix 5000 software, version 11 or
higher, you can also use the Series C modules with ControlNet and
Ethernet adapters.
Identify Module Components
Use the figure to identify the external features of the modules.
Analog
Voltage
Output
Module
Status
Network
Status
NODE:
0
1
The wiring base assembly includes terminal base, 1734-TB or 1734-TBS,
43931
Interlocking
Side Pieces
DIN Rail
Locking
Screw
(orange)
Removable Terminal Block (RTB)
Slide-in Writable Label
Insertable I/O Module
Module
Wiring
Diagram
Mounting Base
RTB Removable Handle
Module
Locking
Mechanism
Mechanical
Keying
(orange)
which consists of mounting base, 1734-MB, and removable terminal block,
1734-RTB or 1734-RTBS.