Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 101)

Publication 1738-UM001A-EN-P - February 2005
Quick Start For the 1738-ADNX B-27
6. Click Associate File to associate the SubnetADNX.dnt file to the
main network.
7. Press OK (not cancel) to save the association.
Now that they are associated, you can easily jump between the
main network and the Subnet and vice versa. Another advantage
is that the main network has access to the information saved in
Subnet.dnt.
8. Click the Online icon.
9.
If
prompted to save, click Yes.
10. At the prompt, click OK.
11. Let the browse finish then double click on the 1756-DNB icon to
pull up its properties.
12. Click the Module tab and if prompted choose Upload.