Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 43)

1 Publication 1738-UM001A-EN-P - February 2005
Chapter
3
Use Auto Start Mode
This chapter describes how to use the Auto Start Mode with your
ArmorPoint I/O DeviceNet adapters.
This chapter assumes you already have an ArmorPoint system
mounted. There are five simple steps to the Auto Start Mode:
See the following sections: Page:
Why Use Auto Start Mode? 3-2
Install the I/O Module 3-4
Use RSNetWorx for DeviceNet 3-5
Begin Auto Start Mode 3-7
Use Custom Configuration 3-9
Chapter Summary and What’s Next 3-10
1738-ADN12
DeviceNet In
DeviceNet Out
X10
Adapter
Status
DeviceNet
Status
PointBus
Status
System
Power
Adapter
Power
R
X1
PWR
MOD
NET
0
1
2
3
4
5
6
7
1738-OB8EM12/A
24V dc Out
0
1
2
3
4
5
6
7
1. Install the I/O Module 2. Wire the DeviceNet Adapters 3. Install the I/O Module
5. Use RSNetWorx
for DeviceNet
5. Begin Auto Start Mode 4. 1738-ADNX Only
Add and Commission
Non-Backplane I/O
Modules to the Subnet
43785
43763
43771