Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 67)

1 Publication 1738-UM001A-EN-P - February 2005
Chapter
6
Troubleshoot the ArmorPoint
DeviceNet Adapter
This chapter describes how to troubleshoot your adapter.
Use the Status Indicators You can use the status indicators to troubleshoot your adapter. The
following graphic shows the adapter’s status indicators.
Use the table below to troubleshoot your adapter
See the following sections: See page:
Use the Status Indicators 6-1
Guidelines for Using Your Adapter 6-3
Chapter Summary 6-3
1738-ADN12
DeviceNet In
DeviceNet Out
X10
Adapter
Status
DeviceNet
Status
PointBus
Status
System
Power
Adapter
Power
R
X1
PWR
Adapter Status Indicator
1738-ADN12
DeviceNet Status Indicator
PointBus Status Indicator
System Power Indicator
Adapter Power Indicator
43785
Indication Indication Probable Cause
Adapter Status Off No power applied to device.
Green Device is operating normally.
Flashing Red Recoverable fault.
Red Unrecoverable fault - may require device replacement.
Flashing Red/Green Device is in self-test.