Rockwell Automation 1746-QS,D17466.19 SYNCHRONIZED AXES MODULE - Manual (Page 15)

Chapter
3
Publication 1746-6.19 March 1998
Setting Up Your PC for the
Hydraulic Configurator
This chapter helps you do the following:
•
Obtain the Hydraulic Configurator from the Internet
•
Set up communication between your PC and the module
You can download the Hydraulic Configurator from our website to
your PC. (You can also download ladder logic and transfer it to your
SLC processor, but we cover that in chapter 6.)
System requirements for the Hydraulic Configurator are:
Windows ’95 series A or B and 4M available disk space.
To Access Our Website:
Access the Allen-Bradley website (and 1746-QS software) at:
http://www.ab.com
/mem/appsys/prodinfo/applac/appla/QSsw/index.html
The Hydraulic Configurator is stored there as a self-extracting
Winzip

executable.
To Load the Hydraulic Configurator:
1. Download the Hydraulic Configurator (1746-QS.EXE) onto your
hard drive.
2. Run 1746-QS.EXE. The Winzip self-extractor will ask you
where you want to store the Hydraulic Configurator.
3. Launch it using the file, QsCfg.exe.
4. Set up a shortcut (optional).
Chapter Objectives
Obtaining the Hydraulic
Configurator from the
Internet