Auxiliary power cable – Rockwell Automation 1732E-XXXX Ethernet/IP 24Vdc 16 Input Modules User Manual
Page 13
ArmorBlock 16-Point EtherNet/IP Module, Series A 13
Publication
1732E-IN002B-EN-E - February 2011
The module is 24V DC Sink In/Source Out:
•
16 Input
•
16 Output
•
16 Input Or Output points or any mix of 16 (for example, 15 + 1; 8 +8)
The output is short circuit protected and output monitoring in
“Self-configuring” style.
Refer to On-Machine Connectivity Catalog, publication
, for
Rockwell Automation cable and cord set offerings or access the Connection
Systems website at
http://www.ab.com/connectionsystems/
. You can also
use the configuration tools available at
http://www.rockwellautomation.com/en/e-tools/
.
Auxiliary Power Cable
Attach the mini-style 4-pin connector to the mini-style 4-pin receptacle as
shown below.
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP67 requirements.