Rockwell Automation 1747-AENTR SLC to EtherNet/IP Adapter Installation Instructions User Manual
Page 11
SLC 500 EtherNet/IP Adapter 11
Publication 1747-IN521B-EN-E - January 2013
1. Attach the cables with the RJ-45 connectors to the two Ethernet ports on the bottom of
the module.
2. Attach the other end of the cables to the devices in your network.
Troubleshoot with Status Indicators and Status Display
The module has indicators on the front panel as shown below.
Use these indicators to troubleshoot the module.
The following table describes how to use the indicators to troubleshoot your module.
IMPORTANT
For information on how to install systems with rack extensions, you can refer
to the SLC 500 Modular Hardware Style User Manual,
publicat
1747-AENT
LINK1 LINK2
MOD
Module status indictator
Link 1 and Link 2 status
indictators
Four character display