Rockwell Automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A - Manual (Page 9)

ArmorPOINT I/O DeviceNet Adapters 9
Publication 1738-IN014D-EN-E - December 2010
Auxiliary Power
Attach the mini-style 4-pin connector to the mini-style 4-pin receptacle as
shown below.
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP enclosure type requirements.
ATTENTION
To comply with the CE Low Voltage Directive (LVD), this equipment and all
connected I/O must be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
Male in Connector
43587
(View into connector)
Pin 1 User power+
Pin 2 Adapter power+
Adapter/Subnet+ (1738-ADNX only)
Pin 3 Adapter power-
Adapter/Subnet- (1738-ADNX only)
Pin 4 User power-