Rockwell Automation 1788-CN2FF ControlNet to Foundation Fieldbus H1 Linking Device Installation Instructions - Manual (Page 17)

ControlNet-to-Foundation Fieldbus H1 Linking Device 17
Publication 1788-IN051D-EN-P - February 2004
Connecting to the Fieldbus Network
Figure 9 Fieldbus Connector Locations on the 1788-CN2FF
Use pins 6 and 7 for the Fieldbus signals, as specified in the Fieldbus Standard for Use in
Industrial Control Systems, Part 2, ISA-S50.02.1992. Refer to Figure 10 for the connector pinout
of the 1788-CN2FF.
Figure 10 Fieldbus Connector Pinout for the 1788-CN2FF
IMPORTANT
Make sure that the power to the network is off when
connecting the module.
43171
Fieldbus Connections
1 2 3 4 5
6 7 8 9
N
C
N
C
N
C
N
C
N
C
NC NC Data + Data –
43172