Rockwell Automation 1738-IB16DM12 ArmorPoint 24V DC 16 Point Input and Output Modules - Manual (Page 7)

ArmorPoint 24V DC 16 Point Input and Output Modules, Series A 7
Publication 1738-IN023B-EN-E - February 2010
Install the Digital Module
To install the digital module, proceed as follows:
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 1 aligns with the notch in the base.
2. Position the module vertically above the mounting base.
The module bridges two bases.
3. Push the module down until it engages the latching mechanism.
You hear a click sound when the module is properly engaged.
The locking mechanism locks the module to the base.
1738-OB16EM12/A
24V dc Out
MOD
NET
15
14
13
12
11
10
9
8
FAULT
0
1
2
3
4
5
6
7
0-1
14-15
12-13
10-11
8-9
2-3
4-5
6-7
43771
Module bridges two bases
1738-OB16EM12 shown