Rockwell Automation 1747-ACNR15 ControlNet Adapter Module Installation Instructions User Manual
Page 11
Advertising
ControlNet Adapter Module 11
Publication 1747-IN017C-EN-P - May 2001
5. For redundant adapters (1747-ACNR15), remove (and save) the dust cap
located on the straight or right angle connector of the designated tap on the
second segment (segment 2).
6. Connect this tap’s straight or right angle connector to the BNC connector on
the adapter.
7. After terminating your segments, connect the node to the network.
segment 2
tap
dust cap
segment 1
tap
segment 2
tap
Advertising
This manual is related to the following products: