3 - initial setup and mode menu, Objectives, Chapter 3 – Rockwell Automation 2707-MVH232_MVP232 MicroView Operator Interface Module User Manual
Page 17: Initial setup and mode menu, Objectives -1, Chapter
Advertising
1
Publication 2707-UM005AB-EN-P
Chapter
3
Initial Setup and Mode Menu
Objectives
This chapter describes how to apply power to and then configure the
MicroView using the menu keys. Instructions on how to use the
Simulate mode to run an application are also provided. This chapter
contains the following sections:
Section
Page
Applying Power
Powerup Sequence
Mode Menu
Resetting the MicroView
Setting Communication Parameters Manually
Special Functions for Controller Operations
Entering a New Master Security Code
Enabling or Disabling Scaling
Using Simulate Mode
Test Functions
Advertising