Rockwell Automation 2707-MVH232_MVP232 MicroView Operator Interface Module - Manual (Page 8)

Publication 2707-UM005B-EN-P
1-2 Using this Manual
Conventions This manual uses the following conventions:
•
Keys that you press on the MicroView are enclosed in brackets
[ ]. For example: [NEXT] refers to the NEXT key on the
MicroView.
•
References to menus are initial cap followed by the word Menu.
For example: Special Menu, Main Menu, Other Menu
•
All MicroView displays are shown inside a rectangular box.
Related Publications The following publications may be helpful for additional reference.
Rockwell Automation
Support Rockwell Automation offers support services worldwide, with over 75
Sales/Support Offices, 512 authorized Distributors and 260 authorized
Systems Integrators located throughout the United States alone, plus
Rockwell Automation representatives in every major country in the
world.
Local Product Support
Contact your local Rockwell Automation representative for:
•
sales and order support
•
product technical training
•
warranty support
•
support service agreements
Technical Product Assistance
If you need to contact Rockwell Automation for technical assistance,
refer to the Troubleshooting chapter first and then call your local
Rockwell Automation representative.
1 Reset
2 Comm 3 Spec
4 Other
Publication / Catalog
Number Title
2707-PM002B-EN-P
(was Publication 2707-805) MicroView Programming Software, Programming Manual
2707-801 DTAM Programming Software, Programming Manual
Publication / Catalog
Number Title
1761-6.3 MicroLogix 1000 User Manual