Rockwell Automation 2707-MVH232_MVP232 MicroView Operator Interface Module - Manual (Page 68)

Publication 2707-UM005B-EN-P
8-14 Troubleshooting and Maintenance
Cleaning the Display
Window To clean the display window:
1. Disconnect power from the terminal at the power source.
2. Using a clean sponge or a soft cloth, clean the display with a
mild soap or detergent.
3. Dry the display with a chamois or moist cellulose sponge to
avoid water spots.
To remove paint and grease:
Remove fresh paint splashes and grease before drying by rubbing
lightly with isopropyl alcohol. Afterward, provide a final wash using a
mild soap or detergent solution. Rinse with clean water.
ATTENTION
!
Use of abrasive cleaners or solvents may damage the
window. Do not scrub or use brushes. some types of
paper towels may scratch the window, only use a
soft sponge or cloth.