Rockwell Automation MPL-xxxx Low Inertia Servo Motor 215 mm or Larger - Manual (Page 16)

16 MP-Series Low-inertia Servo Motor with 215 mm or Larger Frame Size
Rockwell Automation Publication MP-IN002D-EN-P - January
Dimensions (continued)
Motor Load Force Ratings
Motors are capable of operating with a sustained shaft load. The load force locations are shown
in the figure and maximum values are in the tables.
Loads are measured in kilograms; pounds are mathematical conversions.
Load Forces on Shaft
The following tables represent 20,000 hour L
10
bearing fatigue life at various loads and speeds.
This 20,000 hour life does not account for possible application-specific life reduction that can
occur due to bearing grease contamination from external sources.
Motor
Cat. No. LB (1)
mm (in.)
(1) For motors with a brake, for example MPL-Bxxx-xxx4AA, add to MPL-B6xx dimensions LB, LD. and LE: 108.0 mm (4.25 in.); to MPL-B8xx
dimensions LB, LD. and LE:107.9 mm (4.26 in.); and to MPL-B9xx dimensions LB, LD 127.0 mm (5.0 in.).
LD (1)
mm (in.)
LE (1)
mm (in.)
M
mm (in.)
N (2)
mm (in.)
(2) Tolerance for the dimension is MPL-B6xx +0.014, -0.011 mm, (+0.0005, -0.0005 in.); MPL-B8xx +0.016, -0.013 mm, (+0.0006, -0.0005 in.);
MPL-B9xx +0.016, -0.013 mm, (+0.0005, -0.0006 in.).
P
mm (in.)
S (3)
mm (in.)
(3) Tolerance for the dimension is MPL-B6xx +0.43 mm (±0.008 in.); MPL-B8xx and MPL-B9xx +0.52 mm (±0.010 in.).
T
mm (in.)
Shaft End
Threaded Hole
mm (in.)
MPL-B640
223.8
(8.81) 183.6
(7.23) 112.5
(3.15)
215.0
(8.465) 180.0
(7.0867) 184.9
(7.28)
14.50
(0.579)
3.73
(0.147)
M12 x 1.75- 6H
thread depth
28 (1.10)
MPL-B660
274.6
(10.81) 234.4
(9.23) 163.3
(6.43)
MPL-B680
325.4
(12.81) 285.2
(11.23) 214.1
(8.43)
MPL-B860
284.4
(17.45) 242.6
(9.55) 171.4
(6.75)
265.0
(10.433) 230.0
(9.0551) 230.0
(9.25) 3.86
(0.152)
M16 x 2- 6H
thread depth
36 (1.42)
MPL-B880
335.2
(13.20) 293.4
(11.55) 222.2
(8.75)
MPL-B960
293.3
(11.55) 248.9
(9.80) 177.9
(7.0)
300.0
(11.811) 250.0
(9.8426) 266.7
(10.50) 18.50
(0.738) 4.88
(0.192)
M16 x 2- 6H
thread depth
36 (1.42)
MPL-B980
344.1
(13.55) 299.7
(11.80) 228.7
(9.0)
Axial Load Force
Radial load force applied at center of shaft extension.