Autocue WINCUE - Manual (Page 18)

WINCUE USER GUIDE CHAPTER 3 – CONNECTING WINCUE PERIPHERALS
18     AUTOCUE LTD. 2002
The I.M.T. scroll control will not work if it is attached to any other port on your PC.
3.2.2 Connecting a Composite Video Feed
The I.M.T. box is made in two versions, one has four BNC composite outputs and the other has one. These ports
supply the composite video feed to the prompter screen(s). You can connect your video cable to the BNC output.
See Appendix C3 & C4 for further details.
3.2.3 Connecting a Genlock Feed
The genlock port is the BNC port next to the I.M.T. scroll control port on the I.M.T. box. This port accepts a genlock
feed.
3.2.4 Connecting a Power Supply
The I.M.T. box can be powered from one of three different sources the mains power supply, 12V DC and an
optional PAG battery (UK version only). A reset button is provided on the I.M.T. box to reset the I.M.T. scroll card.