Autocue WINCUE - Manual (Page 20)

WINCUE USER GUIDE CHAPTER 4 – CONFIGURING WINCUE
20     AUTOCUE LTD. 2002
Enter a name for the new device and click the down arrow to select the type from the drop down list. For the multi-
button scroll controller select Hybrid Multibutton.
Click OK and you will see the new device listed. Select it by clicking on it and click the Setup button.
4.2.1 Configuring the Controller Mode and Port
Select the serial port you are using by clicking on the down arrow and selecting from the drop down menu.
If the operator wants the prompted text to stop scrolling when the marker on the scroll knob is centred and does not
want to use the forward reverse button to change the direction of the prompted text then you can set the Controller
mode to Centre Stop by clicking on the radio button next to the option.
4.2.2 Configuring the buttons
Click on the Buttons tab. Click on the button you wish to configure. Click the down arrow and select the
required button from the drop down list.