Autocue WINCUE User Manual
Page 78
WINCUENEWS PROMPTER GUIDE
APPENDIX A
78
AUTOCUE LTD. 2002
which can be obtained from Autocue.
SCSI Hard disks on the same SCSI BUS as IMTCard:
Certain drives do things to the SCSI bus that prevent the IMT from working particularly SCSI drives from Micropolis,
Quantum and Western Digital. Some drives should work providing the SCSI address(ID) of the IMT card is higher
(a lower number) than the SCSI disk E.G. IMT address(ID) is 3 then hard disk is 4 or above. Drives that should
work are Seagate, O'Connor and IBM. It is also important that only one device on the SCSI bus is terminated. The
device located at the end of the cable must be the only one terminated. By default the IMT card is terminated, and
is expected to be connected to the end of the SCSI cable. SCSI termination is set using jumpers or switches on the
SCSI devices, consult the relevant manuals for further details.
The following tables detail hardware devices recommended for use with WinCueNews. If you wish to use devices
not listed here, please contact your vendor.