Bang & Olufsen BeoVision MX_4002 - User Guide - Manual (Page 19)

19
Once you have found the Teletext
page you want to read, there are
various facilities at your disposal which
make it easier for you to read the
page.
To use each of these functions, listed
below, follow the instructions shown
to the left…
*Note: In order to display REVEAL on Beo4, you
must add the function to the Beo4 list of
functions, see Beo4’s own User’s guide and the
chapter, Customizing your Beo4, for further
instructions.
STOP/SUBPAGE
Before you use this function, you must call up the
Teletext page of which you want a subpage. A
Teletext page can have a large number of
subpages which turn successively. The subpages
are identified by a 4-digit subcode.
To retain subpages which would otherwise “turn”
automatically, press STOP. The pages you have
retained will not be released until you press STOP
again.
LARGE
You can enlarge the text so that it is easier to
read from a distance. When you have chosen to
enlarge the Teletext, the upper half of the page
appears first, then you must press GO to see the
lower half of the page. You decide when you
want to return to normal page size by pressing
GO.
MIX
You can also superimpose the Teletext page on
the TV picture so that you can see both
simultaneously. You decide when you want to see
just the Teletext page again by pressing GO.
REVEAL*
If a Teletext page contains concealed text, for
example the answer to a riddle, you can use the
reveal function to reveal the concealed text.
When you want to conceal the text again, press
GO.
Retaining subpages…
Call up the Teletext page with
subpages…
Press to retain any subpage
Press to see subpages
Alternatively,
Key in the four digits for the
subpage you wish to see, for
example subpage 0005
Press STOP to release the page
Press until LARGE is displayed
Press to enlarge the text
Press GO again to enlarge the
remaining part of the text; and press
GO again to return to normal
Teletext size
Press until MIX is displayed
Press to superimpose the Teletext
page on the TV picture
Press GO again to see only the
Teletext page
Press until REVEAL* is displayed
Press to reveal concealed text
Press GO again to conceal the text
then
GO
Using the basic Teletext functions
LIST
then
GO
LIST
then
GO
LIST
STOP
STOP
then
then
0
0
0
5
or