Bang & Olufsen BeoVision MX_4002 - User Guide - Manual (Page 30)

C O N N E C T I N G E X T R A E Q U I P M E N T
30
Press to call up the main menu
The main menu appears…
Press until Setup is lit up
Press to call up the Setup menu
The Setup menu appears…
Press until Sockets is lit up
Press to call up the Sockets menu
The Sockets menu appears…
Press to reveal options for the items
in the menu
Press to move from item to item
Once all the relevant information
has been entered…
Press GO to store it and return to the
main menu
Press STOP to return to the Setup
menu without storing the
information you have entered
Press to remove the menus from the
screen
TV setup for connected equipment …
Before you start…
You only have to program the TV setup if:
• You have connected external Power Link
speakers to your MX 4002 TV
• You have connected a Bang & Olufsen video
tape recorder of a type other than the BeoCord
VX 7000 or V 8000
• You have connected any non-Bang & Olufsen
equipment to your TV
The equipment you have connected to
your MX 4002 TV must be registered in
the TV Sockets menu*. When you have
filled in all the information required,
the TV setup is completed.
See the next page for information of
the individual items on the Sockets
menu.
*Note: Please refer to page 28 for information of
what can be connected to your MX 4002 TV and
where to connect it.
Please note…
If no connections are made to a sockets, the
text in the Sockets menu must read “Off”.
PL AV1 AV2 S-VHS
Off V.TP-1+Dec V.TP-2 B&O Off
Menu
• TV program list
• Sound
• Picture
• Setup
Setup
• Tuning
• Timer
• Clock
• Sockets
• Stand
The main menu
The Setup menu
MENU
or
or
tt
ss
then
STOP
GO
GO
then
GO
then
or
EXIT
The TV Sockets menu – allows you to register
equipment such as external speakers, a video tape
recorder or any non-Bang & Olufsen equipment.