Bang & Olufsen BeoVision MX_4002 - User Guide - Manual (Page 29)

… C O N N E C T I O N S
29
Headphones
You can connect headphones to the
socket in the lower right-hand corner
on the front. If you connect
headphones, the TV speakers are cut
out.
Note: If you have connected external
speakers to your TV, they will not be
cut out unless you press LIST until
SPEAKER
is displayed then 1, see page
25 for further instruction.
Note: In order to display SPEAKER on Beo4, you
must add the function to Beo4. Please refer to
Beo4’s own User’s guide for further instruction.
Buttons on the front
When the TV is switched on, press the
mains switch • on the front of the TV
to switch the TV off completely, a brief
clicking noise is heard and the button is
released. The indicator light in the top
right hand corner of the TV is now
switched off.
To switch to standby, so that the TV is
ready to be used again, press the mains
switch • again. When the TV is
switched to standby, the indicator light
turns red. When the TV is switched on
the indicator light is green.
The button marked P enables you to
switch on the TV, if the TV is in standby
mode, and to step through the preset
TV programs.
Sockets and buttons on the front