Bird Technologies 3140 Display - Manual (Page 29)

Maintenance
19
Chapter 6 Maintenance
Inspection and Cleaning
This unit requires only simple and routine maintenance.
1. Wipe off dust and dirt regularly. Use a soft, clean cloth dampened
with mild detergent.
Check connectors, connector pins, and cables for damage. If needed,
clean the connectors using a self-drying contact cleaner that leaves no
residue.
ROHS
WARNING
Disconnect the unit from the RF power source and
the ac line before any disassembly. The potential for
electrical shock exists.
CAUTION
Do not use harsh or abrasive detergents for
cleaning.
Part
Name
Toxic or hazardous Substances and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybro-
minated
biphenyls
(PBB)
Polybro-
minated
diphenyl
ethers
(PBDE)
Copper
Alloy X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in
SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of
the homogeneous materials used for this part is above the limit requirements in
SJ/T11363-2006.