Boss Audio Systems GS-10 - Manual (Page 139)

139
Installing & Setting Up the Driver (Windows)
8.
Check CD-ROM drive, and click [Next].
A dialog box like the one shown below will appear.
fig.11-310
9.
Click [Next]
File (driver) copying will begin.
When installation of the USB Composite Device driver is completed, a dialog box like the one shown
below will appear.
fig.11-330
10.
Click [Finish].
Next, the USB audio device will be detected automatically, and the “Add New Hardware Wizard”
dialog box will appear.
fig.11-340
If the Windows CD-ROM is not inserted in the CD-ROM drive, a “Insert Disk” dialog box may
appear. In this case, insert the Windows CD-ROM into the CD-ROM drive and click [OK].
fig.11-320