Boss Audio Systems GS-10 User Manual
Page 74
74
Chapter 8 Using the GS-10 with External MIDI Devices Connected
Enabling/Disabling the Program
Change Map Settings (MIDI Map Select)
This setting determines whether patches are switched
according to the Program Change Map settings, or to the
default settings.
1. Press [SYSTEM], then press PARAMETER [
]
[
] so that “MIDI:Map Select” is displayed.
fig.08-260d
2. Rotate the PATCH/VALUE dial to select “Fix” or
“Prog.”
Fix:
Switches to the patches according to the default settings.
For more on the default settings, refer to “Initial Program
Change Map settings” (p. 73).
Prog:
Switches to the patches according to the Program
Change Map.
3. Press [EXIT] to return to the Play screen.
Changing Patch Numbers on an
External MIDI Device From the GS-10
When patches are switched with the GS-10, a Program
Change message is transmitted. The correspondence
between the GS-10’s initial bank and patch numbers and the
transmitted Program Change messages is shown in the table
below.
Patch Number
Program Change
Bank
Select
Program
Number
U001
0
1
U002
2
U003
3
:
:
:
:
U098
98
U099
99
U100
100
P101
1
1
P102
2
P103
3
:
:
:
:
P198
98
P199
99
P200
100