Boss Audio Systems GS-10 - Manual (Page 155)

155
Installing & Setting Up the Driver (Macintosh)
■ Mac OS X users
1.
With the GS-10 disconnected, start up Mac OS.
Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2.
Insert the CD-ROM into the CD-ROM drive.
3.
Double-click the “GS10USBDriver” icon (found in the Driver (Mac OS X) of the
CD-ROM).
In case of Mac OS X v10.1.5, the display will indicate “Authorization,” then click on the key symbol.
fig.11-560
4.
The “Authenticate” dialog box will appear; type your password and click “OK.”
The display will indicate “Welcome to the GS-10 USB Driver Installer.”
fig.11-570
5.
Click [Continue].
The display will indicate “Select a Destination.”
6.
Click the drive on which the system is installed, then click [Continue].
The display will indicate “Easy Install.”
fig.11-590
7.
Click [Install] or [Update].
The display will indicate “Installing this software requires you to restart...”.
fig.11-600