Bowers Group Advanced Electronic/Air Column PC-2200 - Manual (Page 31)

PC-2200
BOWERS METROLOGY page 31 /32 version 2.06 -E
Chapter 7. General
7.1 TROUBLE SHOOTING
Default Actions
The digital display & LED display are off. Check the power(AC 110)
Check the fuse(2A)
Check the power switch(ON) position
The digital display is off. Reset the column.(“Enter” key + Power ON)
The digital display & LED display are not moving. Check the probe position
Check the connection of probe & column.
Check the connection of main board & analog board.
The function M2, M3, M4 do not work The functions M2, M3, M4 must be turned ON at
MEASURE menu.
The calibration is refused “OVER MINIMUM” One or a few data are not compatible between the
specification values and the master values.