Calculated Industries 6020 v3.1 - Manual (Page 10)

8 – Scale Master
®
Classic
[RESET] + [M1+]
Clears the value stored in the
M1+
memory register.
[RESET] + [M2x]
Clears the value stored in the
M2x
memory register.
[RESET] + [RCL]
Clears values stored in memory
M1+
and
M2x
.
Converting Between Scales
The Scale Master Classic can automatically
convert values between scales. For example, 20
feet rolled in 1/16” scale will be converted to
10 feet in 1/8” scale. You may want to roll a
value in one scale and then add that exact value
(unconverted) to a value rolled in another scale.
1) Roll a value and press [M1+] . Press
[SCALE] to change scales.
2) Roll another value and press [M1+] .
3) Press [RCL] [M1+] to recall the combined total.
Using the Counter
You can use the [SUBTRACT/COUnT] key to
count items such as electrical outlets, drains, etc.
Press
[MODE] until you find the “
count
”
mode. Then press the [SUBTRACT/COUnT]
key to count the items.
You can use the
[M1+] and [M2x] memory
keys to store or accumulate the counts for two
different items. After you have a count value,
press [M1+] or [M2x] to store it.
(Cont’d)