Interference, Automatic shut-off, Battery replacement – Calculated Industries 6020 v3.1 User Manual

Page 15: Specifications

Advertising
background image

13 – User’s Guide

Interference

Exposure to direct light or close proximity to cell

phones and other electronic devices may cause

interference with the Scale Master Classic device

and result in erroneous measurements.

Automatic Shut-Off

To conserve battery power, the unit will shut

itself off if it is not used for 4-6-minutes. Press

the

[RESET]

key to restore power. All registers

and settings remain intact, including all

temporary registers.

Battery Replacement

To replace the batteries:

(1) Remove battery door;

(2) Remove batteries and

replace with new batteries,

positive side up.

Specifications

Power Source:

Two 3-Volt CR-2430 lithium batteries.
Approximately 400 hours normal use.

Display Method:

LCD with commas, annunciators and zero

suppression.

Display Capacity (Main Display):

9,999,999 (7 digits)

Advertising