Key definitions/functions, Etting, Tarted – Calculated Industries 6020 v3.1 User Manual
Page 3
1 – User’s Guide
G
eTTinG
s
TarTed
Key Definitions/Functions
[Off/On] – Power On/Off Switch
Turns power On or Off. Turning power Off
does not clear scales, modes or units.
[RESET]+[SUBTRACT/COUnT] – Clear All
Clears all values, including memory. Resets
all permanent settings, except clicker and
beep settings.
[Off/On] to turn the device off, then
[MODE] + [Off/On] – Software Reset
Clears all values, including memory. Resets
all permanent settings, including clicker and
beep settings.
[LOCk] – Lock Switch
Locks the mode, scale and units so they
cannot inadvertently be changed.
[SUBTRACT/COUnT] – Subtract/Count key
Toggles measuring mode between positive
and negative direction. Increases the Count
value by one. Count function is active in the
“
count
” mode.
[RCL] – Recall key
Used to recall stored values. When you
press
[RCL] [RCL]
, the last value rolled is
displayed, allowing roll to continue from
this value.