Calculated Industries 6270 User Guide - Manual (Page 50)

APPENDIX C APPENDIX D
SPECIFICATIONS REPAIR AND RETURN
WARRANTY, REPAIR AND RETURN INFORMATION
Return Guidelines
1. Please read the Warranty in this User’s Guide to
determine if your Calculated Industries product
remains under warranty before calling or returning any
device for evaluation or repairs.
2. If your product won’t turn on, check the battery as
outlined in the User’s Guide.
3. If you need more assistance, please go to the website
listed below.
4. If you believe you need to return your product, please call a
Calculated Industries representative between the hours of
8:00am and 4:00pm Pacifi c Time for additional information
and a Return Merchandise Authorization (RMA).
Call Toll Free: 1-800-854-8075
Outside USA: 1-775-885-4900
www.calculated.com/warranty
WARRANTY
Warranty Repair Service – U.S.A.
Calculated Industries (“CI”) warrants this product against
defects in materials and workmanship for a period of one (1)
year from the date of original consumer purchase in the U.S.
48 — U
LTRA
S
CALE
M
ASTER ®
P
RO
Operating Modes Stand Alone Operation, PC Input Mode,
Digitizer Tablet Coordinate Entry (optional
software is required)
Operating Systems Supported Windows 2000, XP & Vista
Computer Interface USB 1.1 and 2.0 compatibile HID Mode
Bar Dimensions:
Footprint 651 x 956 x 36 mm (25.63 x 37.63 x 1.40 inch)
Active Measurement Area 610 x 914 mm (24 x 36 inch) (re-configurable)
Weight 1049 grams (2.31 lbs)
Puck Dimensions:
Footprint 294 x 199 x 30 mm (11.57 x 7.83 x 1.18 inch)
Weight 200 grams (7 oz)
Power Source USB power when connected to PC
4 "AAA" batteries when used as stand alone
Range 1 to 36 inches
Accuracy ±0.040 inch
Operating Temperature 5 to 40°C (41 to 104°F)
Storage Temperature -20 to 60°C (14 to 122°F)
Humidity Range 0 to 95%, non-condensing