Loading sample data, Loading sequencer data, Loading sample data loading sequencer data – Boss Audio Systems SP-505 User Manual

Page 68

Advertising

Chapter 11. Using a memory card

Never turn off the power while the display indicates
“Keep Power On!”

Loading memory card data
into internal memory (Load)

* It is not possible to load data into a protected pad bank.

Loading sample data

Here’s how sample data saved on a memory card can be
loaded into the SP-505.

1. Press [SONG] or [PTN] to display the Play screen.

2. Press [SYSTEM] to display the System screen.

fig.10-01a

* It is not possible to display the System screen while a pattern

or song is playing.

3. Press [F3] (CARD).

* If a memory card is not inserted, “CARD” will not appear

above [F3].

4. Press [F2] (LOAD).

* If the memory card has been formatted in a format that cannot

be read by the SP-505, “LOAD” will not appear above [F2].
Please format the card. (p. 66)

5. Press [F1] (SAMPLE).

fig.11-03a

6. Use the VALUE dial to select the number of the area

that you want to load.

One bank of the SP-505’s internal memory will be loaded
as a set.

If no files have been saved, the display will indicate
“******”.

7. Press CURSOR [

↓

] to move the cursor to the pad bank

display.

8. Use the VALUE dial to select the pad bank that you

want to load.

9. To load the data, press [F1] (EXECUTE).

To cancel, press [F2] (CANCEL).

10. Press [SONG] or [PTN] to return to the Play screen.

* When you load, the sample and sequencer data saved in

internal memory will be erased. Be sure to save important data
on a memory card before you load. (p. 67)

Never turn off the power while the display indicates
“Keep Power On!”

Loading sequencer data

Sample and sequencer (pattern/song) data that you’ve saved on
a memory card can be loaded back into the SP-505 as follows.