ClearCube I/Port Users Guide User Manual
Page 25
• 15
on the I/Port to optimize the user experience. Most of the performance optimization revolves
around configuring RDP in the most appropriate fashion, given your infrastructure.
ClearCube recommends using the I/Port primarily on a corporate network (100Mbps or faster)
with Sentral. However, you may have users who will use I/Ports for remote applications, such
as office access from home, offshore development, etc.
RDP allows several configurable capabilities. Enabling each additional capability requires
more bandwidth, thus impacting performance. The ideal I/Port performance optimization
process will lead to the best possible experience within any limitations of your operating
environment.
shows the RDP Control Panel, where these adjustments can be made.
Note:
Adjustments made to the RDP interface settings do not affect the Sentral client
settings.
The following items can be configured prior to initiating an RDP connection:
•
Display: Desktop Size – Though RDP allows the desktop to be sized so that the RDP
connection runs in a window smaller than the local XPe desktop, anything less than
full-screen mode is not recommended for I/Port users.
•
Display: Color Depth – The color depth options range from 256 to True Color. Generally,
using only 256 colors negatively impacts the user experience, because most images are
grainy and low quality. 16-bit color is normally used.
Figure 9. Remote Desktop (RDP) Configuration Window