ClearCube I/Port Users Guide - Manual (Page 36)

26 •
I9420 I/Port Display Resolution and Bandwidth Requirements
The following table describes dual display resolutions for various display resolutions.
Bandwidth values are provided in megabits per second (Mbps).
Table 2. I9420 Dual Display Resolution and Bandwidth Requirements
Deploying I9440 I/Ports
You can use Sentral to manage the I9440 I/Ports in your environment. The following
instructions assume that Sentral is already deployed and configured appropriately for your
environment. For more information about installing, configuring, and using Sentral to mange
the hosts and thin clients in your environment, see Sentral Administrator’s Guide.
To deploy I9440 I/Ports in your environment, perform the following steps.
1. Unpack the I9440 I/Port and all components from the shipping container, as described in
" Unpacking the I/Port " on page 9.
2. Connect all cables and power as described in " Setting up the I/Port " on page 9.
3. Ensure that the I9440 is connected to your Sentral network, as shown in " Cable
Requirements " on page 8.
4. From Sentral, run a discovery to discover the I9440. See Sentral Administrator’s Guide
for information about how to run a discovery.
5. From Sentral, allocate the I9440s that you discovered to hosts, to users, or to both. See
Sentral Administrator’s Guide for information about how to allocate I/Ports (thin clients).
From the I9440 screen, the I9440 user can now click Connect and enter their Windows
username and password to connect to the host or host group to which they are allocated.
Display Resolution 1280 x 768 1280 x 1024 1680 x 1050 1600 x 1200
Typical Bandwidth
Allocation
10Mbps 16Mbps 22Mbps 24Mbps
Extreme Bandwidth
Allocation
— — 44Mbp 48Mbp
Note: If the bandwidth is limited the compression algorithms will
compensate for the available bandwidth. This will cause
some loss of the texture detailing in the video.