Metrohm 726 TP Backup User Manual
Page 21
726 TP Backup
20
8.726.8007 Instructions for Use
Transmit Buffer
Size
Determines the size of the transmit buffer. Any value between
1024 and 20480 bytes can be entered. Select a relatively large
buffer if computer-bound operations are being performed in
parallel to the 726 TP Backup program. If the buffer size is too
small and the other program requires too much computing
power, the 726 Titroprocessor may output the error message
"Send timeout". In such a case, wait until the PC is again "free"
and then press r r for "retry" on the 726 Titroprocessor. The
transfer will be continued.
Handshake
With the 6.2125.060 Connecting cable, work should be
performed only with HWshort.
If you wish to accept the changes, click OK. To return to the program without
saving the changes, click Cancel.
Select Save from the Configuration menu to save the changes.
5.5 Default settings
In this window, the storage directory and the file name extensions for the ASCII
files (Reports) are defined. Open the window by selecting the Defaults
command from the Configuration menu.