Installation and setup, 2 installation and setup – Metrohm 726 TP Backup User Manual
Page 4
Advertising
726 TP Backup
8.726.8007 Instructions for Use
3
2 Installation and setup
2.1 System requirements
Computer
IBM-compatible PC
Operating system
DOS with Windows 3.1x, Windows 95 or NT 4.0
Mouse
required
Memory
min. 4 MB RAM
min. 2 MB free storage on the hard disk,
disk drive 3½"
RS232 interface
for the connection to the 726 Titroprocessor
Connecting cable
6.2125.060
possibly 6.2125.010 Adapter
(adapter cable 25-pin to 9-pin)
726 Titroprocessor
Program version 5.726.0010 or higher
Warning:
Before the RS connecting cable is plugged in or disconnected, both the
PC and the 726 Titroprocessor must be switched off. Connection with
instruments switched on could lead to damage!
Advertising