Metrohm 726 TP Backup - Manual (Page 24)

726 TP Backup
8.726.8007 Instructions for Use 23
This message appears if the 726bkup.ini file has been found, but the entries
are faulty. The program starts with the default settings. Set the configuration to
suit your requirements (see section 2.3) and save the settings with the Save
command in the Configuration menu.
Start of the transfer (receive)
This message appears if the COM interface of the PC is either already in use
(e.g. mouse) or a connection cannot be established. Ensure that the connecting
cable is plugged into the correct socket or change the settings in the
Configuration menu in the dialog box Port Settings.
Do not forget to save the altered settings (Save command from the
Configuration menu).
Start of the transfer (send)
This message appears if the serial interface of the PC is either already in use
(e.g. mouse) or a connection cannot be established. Ensure that the connecting
cable is plugged into the proper socket or change the settings in the
Configuration menu in the dialogue box Port Settings.
Do not forget to save the altered settings (Save command from the
Configuration menu).