9) and mcs (2-10), With the upper high pressure pump (2-3), Msm (2-9) and the left-hand conductivity detec – Metrohm 850 Professional IC AnCat MCS User Manual
Page 23: 18) and
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
850 Professional IC – AnCat – MCS
￭￭￭￭￭￭￭￭
13
3
High pressure pump
See Chapter 2.10.
4
Purge valve
See Chapter 2.10.1.
5
Inline filter
See Chapter 2.11.
6
Pulsation damper
See Chapter 2.12.
7
Injection valve
See Chapter 2.14.
8
Separation column
See Chapter 2.22.
When a guard column (see Chapter 2.21,
page 62) is used, it is installed between
injection valve and separation column.
9
10 MCS
11 Detector
12 Eluent output
Connection to the waste container.
13 Sample input
Connection to the sample vessel (single ves-
sel or sample changer).
14 Sample degasser
15 Sample output
16 Eluent input
Connection to the eluent bottle (see Chap-
ter 2.8.1, page 27).
17 Eluent degasser
18 High pressure pump
19 Purge valve
20 Inline filter
21 Pulsation damper
22 Injection valve
23 Separation column
See Chapter 2.22.
When a guard column (see Chapter 2.21,
page 62) is used, it is installed between
injection valve and separation column.
24 Detector
25 Eluent output
Connection to the waste container.
26 Sample input
Connection to the sample vessel (single ves-
sel or sample changer).
27 Sample degasser
See Chapter 2.13. Use optional.
28 Sample output
29 Peristaltic pump
30 Regeneration solution input
Connection to the regeneration solution
bottle.